Nickel Mesh-Ni200/Ni201 Wire Cloth_METART BUILDING TECH CO., LTD

Architectural Decor Wire Mesh
Cabinet Door Mesh / Wall Cladding Mesh Lift Cabin Cladding Mesh / Elevator Mesh Decorative Wire Mesh Wire Mesh Railing Budget Architectural Wire Mesh Soft Architectural Mesh Framed Decor Woven Wire Screens Architectural Wire Mesh Portraits Crimped Wire Mesh Stainless Steel Security Wire Mesh Stainless Steel Welded Wire Mesh Laminated Glass Infill Metal Fabric Architectural SS Wedge Wire Screen Custom Wire Mesh Fabrication
Industrial Wire Mesh & Filters
Stainless Steel Wire Mesh & SS Wire Cloth Brass-Copper-Bronze Mesh & Wire Cloth Special Alloy Wire Mesh & Wire Cloth Quarry Screen & Steel Wire Mesh & Gal Epoxy Powder Coated Steel Mesh for Filter Mosquito-Fly-Insect Screen Wire Mesh Bushfire Ember Wire Mesh & Perf Sheet Custom-Made Wire Mesh Cylinders & Filters
Perforated Metal & Expanded Metal
Standard Round Hole Perforated Sheets Square Hole Perforated Metal Decorative Perforated Sheet Decorative Laser Cut Screens Pic Perf Sheet-Picture Perforation Architectural Expanded Metal 1.8MM Perforated Aluminium Security Mesh 2.0MM Perforated Aluminium Security Mesh Heavy DVA Privacy AL Security Mesh Aluminium Light DVA Mesh Water Wall Mesh / Waterfall Mesh Precision Etching Micro Hole Perforated Plate
Architectural Cable Mesh Series
Woven Wire Drapery / Cable Rod Wire Mesh Stainless Steel Cable Netting
Architectural Metal Curtain Series
Metal Spiral Tension Mesh Metal Curtains / Metal Coil Drapery Metal Ring Mesh Curtain Anodized Aluminum Chain Curtain
Perf Plank Safety Grating & Others
Anti-Slip Perf Metal Planks & Stair Treads Steel & Stainless Steel Bar Grating

Nickel Mesh-Ni200/Ni201 Wire Cloth

Specification

Material: Ni200 wire/ Ni201 Wire

Type: Industrial Special Alloy Wire Mesh

Weave Pattern: Plain Weave, Twill Weave, Dutch Weave, etc.

Mesh Count: Custom made.

Wire Diameter: Custom made.

Width: Custom made

Length: 30M and other custom length.

GET A QUOTE

Introduction

Nickel wire mesh is normally made of pure Nickel wires which is malleable and ductile. Both Ni200 wire mesh and Ni201 mesh is pure nickel mesh. The difference is only the slightly lower amount of Carbon content. Ni201 mesh is relatively lower in carbon content. Nickel wire mesh is of excellent corrosion resistance high degree of electrical conductivity and low electrical resistivity.

Chemical Composition of Nickel Wire Mesh.

Ni+Co

Ni201

Bal.

0.25%
Max

0.3%

Max

0.35%

Max

0.02%

Max

0.2%

Max

0.01%

Max

0.3%

Max

Ni200

Bal.

0.25%
Max

0.3%

Max

0.35%

Max

0.15%

Max

0.2%
Max

0.01%

Max

0.3%
Max

Physical Properties of Nickel 201 Wire Mesh vs Nickel 200 Wire Mesh

Physical Properties
Room temperature density	0.321 lb/inch3 8.89 g/cm3
Young Modulus at 78℉	29.7 x 10(6) psi
Melting temperature	2624℉ or 1440℃
Specific heat at 70℉	0.109 Btu/lb-℉
Thermal conductivity at 70℉	487 Btu.inch/ft2.h.℉
Electrical resistivity at 70℉	58 ohm.cir mil/ft or 9.5Microhm-cm
Specific gravity	8.89
Temperature coefficient of resistance	0.004/0.005 per ℃
Curie temperature	680℉ or 360℃
Magnetic Saturation	0.61 tesla
Modulus of elasticity in tension	30 x 10(6) osi

Nickel 200/201 Tensile Properties

Cold processed	Ultimate tensile strength	75 ksi or 515 Mpa
	Yield Strength cold processed	50 ksi or 345 Mpa
	Elongation	15 %
Hot processed	Ultimate tensile strength	55 ksi or 380 Mpa
	Yield Strength cold processed	15 ksi or 105 Mpa
	Elongation	40%

Specification List:

Mesh Count /Inch	Wire Diameter		Aperture		Open Area %	Weight (LB) /100 Square Foot
Mesh Count /Inch	Inch	MM	Inch	MM	Open Area %	Weight (LB) /100 Square Foot
1 × 1	.080	2.03	.920	23.37	84.6	41.1
2 × 2	.063	1.60	.437	11.10	76.4	51.2
3 × 3	.054	1.37	.279	7.09	70.1	56.7
4 × 4	.063	1.60	.187	4.75	56.0	104.8
4 × 4	.047	1.19	.203	5.16	65.9	57.6
5 × 5	.041	1.04	.159	4.04	63.2	54.9
6 × 6	.035	.89	.132	3.35	62.7	48.1
8 × 8	.028	.71	.097	2.46	60.2	41.1
10 × 10	.025	.64	.075	1.91	56.3	41.2
10 × 10	.020	.51	.080	2.03	64.0	26.1
12 × 12	.023	.584	.060	1.52	51.8	42.2
12 × 12	.020	.508	.063	1.60	57.2	31.6
14 × 14	.023	.584	.048	1.22	45.2	49.8
14 × 14	.020	.508	.051	1.30	51.0	37.2
16 × 16	.018	.457	.0445	1.13	50.7	34.5
18 × 18	.017	.432	.0386	.98	48.3	34.8
20 × 20	.020	.508	.0300	.76	36.0	55.2
20 × 20	.016	.406	.0340	.86	46.2	34.4
24 × 24	.014	.356	.0277	.70	44.2	31.8
30 × 30	.013	.330	.0203	.52	37.1	34.8
30 × 30	.012	.305	.0213	.54	40.8	29.4
30 × 30	.009	.229	.0243	.62	53.1	16.1
35 × 35	.011	.279	.0176	.45	37.9	29.0
40 × 40	.010	.254	.0150	.38	36.0	27.6
50 × 50	.009	.229	.0110	.28	30.3	28.4
50 × 50	.008	.203	.0120	.31	36.0	22.1
60 × 60	.0075	.191	.0092	.23	30.5	23.7
60 × 60	.007	.178	.0097	.25	33.9	20.4
70 × 70	.0065	.165	.0078	.20	29.8	20.8
80 × 80	.0065	.165	.0060	.15	23.0	23.2
80 × 80	.0055	.140	.0070	.18	31.4	16.9
80 × 80	.0047	.119	.0078	.198	39	11.39

Application

-Food processing equipment,

-Salt extraction equipment

-Mining and ocean mining.

-Nickel-metal hydride batteries, lithium batteries manufacturing.

-Automotive electrical/electronic device parts

GET A QUOTE

Specification

Introduction

You May Also Like

Application

Product

Contact Us