Nickel Alloy 400-Monel 400 Wire Mesh_METART BUILDING TECH CO., LTD

Architectural Decor Wire Mesh
Cabinet Door Mesh / Wall Cladding Mesh Lift Cabin Cladding Mesh / Elevator Mesh Decorative Wire Mesh Budget Architectural Wire Mesh Soft Architectural Mesh Framed Decor Woven Wire Screens Crimped Wire Mesh Stainless Steel Security Wire Mesh Stainless Steel Welded Wire Mesh Laminated Glass Infill Metal Fabric Architectural SS Wedge Wire Screen Custom Wire Mesh Fabrication
Industrial Wire Mesh & Filters
Stainless Steel Wire Mesh & SS Wire Cloth Brass-Copper-Bronze Mesh & Wire Cloth Special Alloy Wire Mesh & Wire Cloth Quarry Screen & Steel Wire Mesh & Gal Epoxy Powder Coated Steel Mesh for Filter Mosquito-Fly-Insect Screen Wire Mesh Bushfire Ember Wire Mesh & Perf Sheet Custom-Made Wire Mesh Cylinders & Filters
Perforated Metal & Expanded Metal
Standard Round Hole Perforated Sheets Square Hole Perforated Metal Decorative Perforated Sheet Decorative Laser Cut Screens Pic Perf Sheet-Picture Perforation Architectural Expanded Metal 1.8MM Perforated Aluminium Security Mesh 2.0MM Perforated Aluminium Security Mesh Heavy DVA Privacy AL Security Mesh Aluminium Light DVA Mesh Water Wall Mesh / Waterfall Mesh Precision Etching Micro Hole Perforated Plate
Architectural Cable Mesh Series
Woven Wire Drapery / Cable Rod Wire Mesh Stainless Steel Cable Netting
Architectural Metal Curtain Series
Metal Spiral Tension Mesh Metal Curtains / Metal Coil Drapery Metal Ring Mesh Curtain Anodized Aluminum Chain Curtain
Perf Plank Safety Grating & Others
Anti-Slip Perf Metal Planks & Stair Treads Steel & Stainless Steel Bar Grating

Nickel Alloy 400-Monel 400 Wire Mesh

Specification

Material: Monel 400 Wires

Type: Industrial Special Alloy Wire Mesh

Weave Pattern: Plain Weave, Twill Weave, Dutch Weave, Crimped Weave, etc.

Mesh Count: Custom made.

Wire Diameter: Custom made.

Width: Custom made

Length: 30M and other custom length.

GET A QUOTE

Introduction

Monel 400 wire mesh is also known as UNS N04400 wire mesh, which is made of advanced nickel-copper alloy wires that has great resistance to seawater and steam at high temperature. Also, it is resistant to salt and caustic solutions.
Monel 400 alloy is well known for its high strength and corrosion-resistant properties. Thus, Monel 400 wire mesh is used extensively in oil refineries and piping, due to its toughness and anti-corrosive properties.
Meantime, Monel 400 woven wires are often found in marine applications such as seawater processing equipment.

Monel 400 bars provide superior quality and are able to withstand very large amounts of weight and pressure. They are used in many different types of structural, mechanical, and general engineering applications. The toughness of this alloy makes Monel 400 wire mesh ideal for use in mining, oil & gas, cement, and nuclear power plants.
Monel 400 alloy has many important properties that make it an attractive option for areas where corrosion resistance is of the highest priority. Whether it comes in (Hot Rolled Plate, Cold Rolled Sheet, Cold Rolled Strip) pipes, tubes, wires, or bars, its unique properties make it a staple of marine, chemical, and numerous other applications.

EQUIVALENT STANDARDS
INDUSTEEL TRADEMARKS	UNS	ASTM	EURONORMS EN	SUS
	N04400	N04400	2.4360, 2.4361

Chemical Composition of Nickel Alloy 400 and Monel® 400 wire mesh

C	Mn	S	Si	Ni	Cu	Fe
.30 Max	2.0 Max	.024 Max	.50 Max	63.0 Min	28.0-34.0	2.5 Max

Physical Properties of Monel 400 Alloy Wire Mesh

Property	Metric Units
Melting Range	1300-1350°C
Density	8,800 kg/m³ @ 20°C
Coefficient of Thermal Expansion	13.9 x 10 ^-6 / °C (20°C)
Curie Temperature	20-50°C
Thermal Conductivity	21.8 W/m. °C @ 20°C
Thermal Capacity (Specific Heat)	427 J/kg. °C @ 20°C
Electrical Conductivity	32 % IACS
Electrical Resistivity	0.547 microhm.m @ 20°C
Modulus of Elasticity (tension)	179 GPa @ 20°C
Modulus of Rigidity (torsion)	65.5 GPa @ 20°C
Poisson’s Ratio	0.32

Specification List:

Mesh Count	Wire Diameter		Aperture		Open Area	Weight (LB)
/Inch	Inch	MM	Inch	MM	%	/100 Square Foot
1 × 1	0.08	2.03	0.92	23.37	84.6	41.1
2 × 2	0.063	1.6	0.437	11.1	76.4	51.2
3 × 3	0.054	1.37	0.279	7.09	70.1	56.7
4 × 4	0.063	1.6	0.187	4.75	56	104.8
4 × 4	0.047	1.19	0.203	5.16	65.9	57.6
5 × 5	0.041	1.04	0.159	4.04	63.2	54.9
6 × 6	0.035	0.89	0.132	3.35	62.7	48.1
8 × 8	0.028	0.71	0.097	2.46	60.2	41.1
10 × 10	0.025	0.64	0.075	1.91	56.3	41.2
10 × 10	0.02	0.51	0.08	2.03	64	26.1
12 × 12	0.023	0.584	0.06	1.52	51.8	42.2
12 × 12	0.02	0.508	0.063	1.6	57.2	31.6
14 × 14	0.023	0.584	0.048	1.22	45.2	49.8
14 × 14	0.02	0.508	0.051	1.3	51	37.2
16 × 16	0.018	0.457	0.0445	1.13	50.7	34.5
18 × 18	0.017	0.432	0.0386	0.98	48.3	34.8
20 × 20	0.02	0.508	0.03	0.76	36	55.2
20 × 20	0.016	0.406	0.034	0.86	46.2	34.4
24 × 24	0.014	0.356	0.0277	0.7	44.2	31.8
30 × 30	0.013	0.33	0.0203	0.52	37.1	34.8
30 × 30	0.012	0.305	0.0213	0.54	40.8	29.4
30 × 30	0.009	0.229	0.0243	0.62	53.1	16.1
35 × 35	0.011	0.279	0.0176	0.45	37.9	29
40 × 40	0.01	0.254	0.015	0.38	36	27.6
50 × 50	0.009	0.229	0.011	0.28	30.3	28.4
50 × 50	0.008	0.203	0.012	0.31	36	22.1
60 × 60	0.0075	0.191	0.0092	0.23	30.5	23.7
60 × 60	0.007	0.178	0.0097	0.25	33.9	20.4
70 × 70	0.0065	0.165	0.0078	0.2	29.8	20.8
80 × 80	0.0065	0.165	0.006	0.15	23	23.2
80 × 80	0.0055	0.14	0.007	0.18	31.4	16.9
80 × 80	0.0047	0.119	0.0078	0.198	39	11.39
90 × 90	0.005	0.127	0.0061	0.16	30.1	15.8
100 × 100	0.0045	0.114	0.0055	0.14	30.3	14.2
100 × 100	0.004	0.102	0.006	0.15	36	11
100 × 100	0.0035	0.089	0.0065	0.17	42.3	8.3

Mesh Count	Wire Diameter				Type of Weave
	Warp wire dia.		Weft wire dia.
	inch	mm	inch	mm
12x64	0.023	0.58	0.0165	0.42	Plain
14x88	0.019	0.48	0.012	0.3	Plain
14x110	0.016	0.4	0.011	0.28	Plain
24x110	0.014	0.355	0.01	0.25	Plain

Application

-Marine engineering
-Chemical processing equipment
-Crude petroleum stills
-components of boiler feed water heaters and other heat exchangers
-components of Industrial heat exchangers
-Crude oil distillation towers

GET A QUOTE

Specification

Introduction

You May Also Like

Application

Product

Contact Us