hello@metartmesh.com +86 158 0318 7372 / +61 435 598 786

METART-WW45 Decorative Partition Screen Mesh crafted by architectural stainless steel wire strips

Specification

Stainless Steel 304 / Stainless Steel 316 / Stainless Steel 201:

Type: Rigid Architectural Mesh

Opening Area: 52%

Weight: Approx 5.8g/Square Meter

Finish: Mill Finish / Antique Brass Plated / Antique Copper Plated

Screen Width: Customized.within 3000MM (10')

Screen Length: Customized. maxiumum within 4000MM (13')

GET A QUOTE

Introduction

METART-WW45 flat architectural wire mesh is the perfect blend of style and functionality for any architectural project. Its intricate weaving pattern, with bigger wires going over and under smaller double flat wire grilles, creates a stunning visual effect that is sure to impress.

This mesh is made of durable stainless steel wire strips, and we offer a variety of material options to suit your needs. For most indoor projects, Stainless Steel 304 grade is the most widely used and affordable option. For outdoor or coastal projects, we highly recommend using Marine Grade 316 stainless steel, which has excellent corrosion resistance properties in marine environments.

Please note that we do not recommend using Stainless Steel 201 for any project, as it is not as durable and corrosion-resistant as 304 or 316. However, we understand that some customers may be looking for a cheaper option for interior decoration, and 201 grade can be coated with copper, brass, or PVD titanium for the best results.

With a moderate privacy rate of 48% and an opening area of 52%, this mesh offers good visibility and ventilation while maintaining enough privacy for your needs. Its lightweight construction, at only 5.8 kg per square meter, makes it easy to install and work with.

While the mill finish version of METART-WW45 mesh is the cheapest option, we recommend further surface treatment for a better look. Brass-plated, copper-plated, or PVD titanium-plated finishes will enhance the elegance of this mesh and make it stand out in any space.

 

For an even more stunning look, consider having the mesh cut diagonally, which is a favored option among architects, designers, and customers, despite the higher cost compared to a straight cut.

Upgrade your interior or exterior design with the METART WW 45 flat architectural wire mesh, where form meets function in the most stunning way possible.


Please refer to the following specifications.

Material

Stainless Steel 304 or 316, optional

Type

Rigid mesh

Big Strip

10x1mm

Small Strip

2.9x1.2mm

Big Strip Pitch

63.3mm

Small Strip Group Pitch

32mm

The total thickness of the fabric

2.7mm

Opening Area

52%

Block out

48%

Privacy Rate

48%

Weight

5.8g/Square Meter

Finish

Stainless Steel Mill Finish

The way of cutting

Diamond Cut

All optional ways of cut

Straight Cut, Diamond Cut.

All optional Finish

Mill Finish ( Original stainless steel bright finish),
Antique Bronze plating, Antique Copper plating, Antique brass plate, vacuum titanium plated

Customized specifications and Mini order accepted.

Note:

All the measurements including wire thickness, diameter, opening, and overall thickness are nominal numbers. The actual specification might have a tiny bit of tolerance according to fabrication

Application

GET A QUOTE

©COPYRIGHT METART BUILDING TEC CO., LTD  | ALL RIGHTS RESERVED | PRIVACY POLICY