METART-WW17MW Stainless Steel Architectural Mesh for cabinetry, partitions and commercial cladding

Specification

Pattern Code: METART-WW17MW

Material: Stainless Steel 304 / Stainless Steel 316 / SS201

Type: Rigid Architectural Mesh

Opening Area: 35%

Weight: Approx 6.3kg/Square Meter

Finish: Mill Finish

Maximum Sheet Dimention: 3000x4000MM (10x13 feet) for mill finish.

GET A QUOTE

Introduction

METART WW17MW is the Medium-Weighted version of pattern #WW17. Compared to its original version, the only difference is that the waved round wire is smaller. The weight is reduced, but this architectural stainless steel wire mesh is still very rigid and commonly used in the building and decoration industry.

Please refer to the following specification.

Material	Stainless Steel 304 or 316, optional
Type	Rigid mesh
Round Wire Diameter （Single wire）	1.45mm
Flat Wire Strip:	2.4x1.2mm
Flat Wire Strip Pitch	6.5mm
Round Wire Hole Pitch	10.5m
The total thickness of the fabric	3.8mm
Opening Area	35%
Block out	65%
Privacy Rate	65%
Weight	6.3kg/Square Meter
Finish	Stainless Steel Mill Finish.
The way of cutting	Straight Cut
All optional ways of cut	Straight Cut Only
All optional Finish	Mill Finish ( Original stainless steel bright finish）, Antique Bronze plating, Antique Copper plating, Antique brass plate, vacuum titanium plated, Painted, PVDF Coated,
Customized specifications and Mini order accepted.
Note: All the measurements including wire thickness, diameter, opening, and overall thickness are nominal numbers. The actual specification might have a tiny bit of tolerance according to fabrication

Application

GET A QUOTE

Specification

Introduction

You May Also Like

Application

Product

Contact Us