hello@metartmesh.com +86 158 0318 7372 / +61 435 598 786

Decorative Wire Mesh Ceilings

Specification

Pattern Code: METART-WW50-315829

Material: SS304, SS316,SS201

Type of Mesh: Rigid Decorative Mesh

Opening Rate: 62%

Weight: Approx 3.7KG/ square meter

Finish: Antique Copper/Brass/Bronze plated finishes (other finishes available)

Sheet Sizes: Customizable, within 4M x 5M

GET A QUOTE

Introduction

Decorative Wire Mesh Ceilings refer to those mesh screens that are ornamental for commercial ceilings with special features.

The most popular and budget wire mesh ceilings should be made of expanded metal mesh or steel welded wire mesh, especially those cheap options made of mild steel.

Architectural expanded metal and perforated sheets are the most popular architectural mesh for ceilings in metal ceiling selections.

The decorative wire mesh in our factory is an innovative material for fancy commercial ceilings. Holding hundreds of patterns and variants in hand, METART decorative mesh is a bespoke metal ceiling choice for designers and architects.

The following are the most trending finishes for this architectural wire mesh pattern.

 

INTRODUCTION OF DECORATIVE WIRE MESH CEILING PATTERN "METART-WW50-315829"

 

It is a stainless steel decorative woven wire mesh, with a woven wire pattern code number "WW50". It is made from 3x1.5mm stainless steel pre crimped flat wires and diagonally interserted and reinforced by 2x0.8mm straightened flat wires.

The number "315829" indicates the key specification of this architecture wire mesh.

“3” is 3mm, the width of the crimped wire strip.

"15" is the thickness of the crimped strips, 1.5MM.

"8" is the opening of the smaller square hole, 8x8mm

"29" is the big opening formed by the crimped wire strips.

 

Specification Overview

Pattern Code

METART-WW50-315829

Optional raw materials

SS304SS316, SS201

Type of Screen

Rigid Decorative Wire Mesh

Crimped Wire Strips ( width x thickness)

3 x 1.5mm

Straight Flat Wire Size ( width x thickness)

2 x 0.8mm

Big Opening Size

29x29mm

Small Opening Size

8x8mm

Slot Hole Size

8x29mm

Overall thickness

4.5mm

Opening Area

63%

Privacy Rate

37%

Estimated Square Meter Weight

3.7KG

Optional ways of cut

Straight Cut, Diamond Cut.

Optional Finishes

Mill Finish ( Original stainless steel finish,
Antique Bronze plated, Antique Copper plated, Antique brass plated,

PVD Plated,

Painted,

PVDF Painted.

 

DIFFERENCE BETWEEN "METART-WW50-315829" and "METART-WW50-31417"

 

"WW50-315829" is a budget decorative wire mesh pattern that is suitable for both architectural ceilings and commercial space dividers or cabinitry customers who don't mind the 29mm big openings. While it is way more difficult to produce "WW50-31417".  The only advantage is the smaller opening size.

Please refer to the following comparison table between these two variants.

 

METART-WW50-315829

METART-WW50-31417

Price

Much Cheaper

Expensive

Strength

Bigger

Smaller

Rigidity

More rigid

softer

Openings Rate

63%

51%

Sqm Weight

Approx. 3.7KG

Approx. 3.7KG

Opening Size

29mm

17mm

Application

GET A QUOTE

©COPYRIGHT METART BUILDING TEC CO., LTD  | ALL RIGHTS RESERVED | PRIVACY POLICY