UNS.S30900 Mesh-309 Stainless Wire Mesh_METART BUILDING TECH CO., LTD

Architectural Decor Wire Mesh
Cabinet Door Mesh / Wall Cladding Mesh Lift Cabin Cladding Mesh / Elevator Mesh Decorative Wire Mesh Budget Architectural Wire Mesh Soft Architectural Mesh Framed Decor Woven Wire Screens Crimped Wire Mesh Stainless Steel Security Wire Mesh Stainless Steel Welded Wire Mesh Laminated Glass Infill Metal Fabric Architectural SS Wedge Wire Screen Custom Wire Mesh Fabrication
Industrial Wire Mesh & Filters
Stainless Steel Wire Mesh & SS Wire Cloth Brass-Copper-Bronze Mesh & Wire Cloth Special Alloy Wire Mesh & Wire Cloth Quarry Screen & Steel Wire Mesh & Gal Epoxy Powder Coated Steel Mesh for Filter Mosquito-Fly-Insect Screen Wire Mesh Bushfire Ember Wire Mesh & Perf Sheet Custom-Made Wire Mesh Cylinders & Filters
Perforated Metal & Expanded Metal
Standard Round Hole Perforated Sheets Square Hole Perforated Metal Decorative Perforated Sheet Decorative Laser Cut Screens Pic Perf Sheet-Picture Perforation Architectural Expanded Metal 1.8MM Perforated Aluminium Security Mesh 2.0MM Perforated Aluminium Security Mesh Heavy DVA Privacy AL Security Mesh Aluminium Light DVA Mesh Water Wall Mesh / Waterfall Mesh Precision Etching Micro Hole Perforated Plate
Architectural Cable Mesh Series
Woven Wire Drapery / Cable Rod Wire Mesh Stainless Steel Cable Netting
Architectural Metal Curtain Series
Metal Spiral Tension Mesh Metal Curtains / Metal Coil Drapery Metal Ring Mesh Curtain Anodized Aluminum Chain Curtain
Perf Plank Safety Grating & Others
Anti-Slip Perf Metal Planks & Stair Treads Steel & Stainless Steel Bar Grating

UNS.S30900 Mesh-309 Stainless Wire Mesh

Specification

Material: SS309 wire

Type: Industrial Wire Mesh

Weave Pattern: Plain Weave, Twill Weave, Dutch Weave, Crimped Weave, etc.

Mesh Count: Custom made.

Wire Diameter: Custom made.

Width: Custom made

Length: 30M and other custom length.

GET A QUOTE

Introduction

SS309 woven wire mesh, also named as grade 309 stainless steel wire mesh, UNS S30900 wire mesh, WNR 1.4828 wire mesh, is made of from a common Austenitic stainless steel material which is developed and used for high temperature corrosion resistance application.
Grade 309 alloy resists oxidation up to 1900°F (1038°C) under non-cyclic conditions. Frequent thermal cycling reduces oxidation resistance to approximately 1850°F (1010°C).
Due to its high chromium and low nickel content, SS 309 wire mesh can be used in sulfur containing environments up to 1832°F (1000°C). Grade 309 alloy is not recommended for use in highly carburizing atmospheres since it exhibits only moderate resistance to carbon absorption. Alloy 309 woven wire mesh can be utilized in slightly oxidizing, nitriding, cementing and thermal cycling applications, albeit, the maximum service temperature must be reduced.
When heated between 1202-1742°F (650-950°C), alloy 309 is subject to sigma phase precipitation. A solution annealing treatment at 2012-2102°F (1100-1150°C) will restore a degree of toughness.

STANDARDS

INDUSTEEL TRADEMARKS

UNS

ASTM/AISI

EURONORMS EN

SUS

…

S30900

309

1.4828

X12CrNi23-13

SS309, UNS S30900 wire mesh, Chemical Composition, %

Cr	Ni	C	Si	Mn	P	S	Fe
22.0- 24.0	12.0- 15.0	.20 Max	0.75 Max	2.00 Max	.045 Max	.03 Max	Balance

22.0-

24.0

12.0-

15.0

.20

Max

0.75

Max

2.00

Max

.045

Max

.03

Max

Balance

Specification List:

Mesh Count /Inch	Wire Diameter		Aperture		Open Area %	Weight (LB) /100 Square Foot
Mesh Count /Inch	Inch	MM	Inch	MM	Open Area %	Weight (LB) /100 Square Foot
1 × 1	.080	2.03	.920	23.37	84.6	41.1
2 × 2	.063	1.60	.437	11.10	76.4	51.2
3 × 3	.054	1.37	.279	7.09	70.1	56.7
4 × 4	.063	1.60	.187	4.75	56.0	104.8
4 × 4	.047	1.19	.203	5.16	65.9	57.6
5 × 5	.041	1.04	.159	4.04	63.2	54.9
6 × 6	.035	.89	.132	3.35	62.7	48.1
8 × 8	.028	.71	.097	2.46	60.2	41.1
10 × 10	.025	.64	.075	1.91	56.3	41.2
10 × 10	.020	.51	.080	2.03	64.0	26.1
12 × 12	.023	.584	.060	1.52	51.8	42.2
12 × 12	.020	.508	.063	1.60	57.2	31.6
14 × 14	.023	.584	.048	1.22	45.2	49.8
14 × 14	.020	.508	.051	1.30	51.0	37.2
16 × 16	.018	.457	.0445	1.13	50.7	34.5
18 × 18	.017	.432	.0386	.98	48.3	34.8
20 × 20	.020	.508	.0300	.76	36.0	55.2
20 × 20	.016	.406	.0340	.86	46.2	34.4
24 × 24	.014	.356	.0277	.70	44.2	31.8
30 × 30	.013	.330	.0203	.52	37.1	34.8
30 × 30	.012	.305	.0213	.54	40.8	29.4
30 × 30	.009	.229	.0243	.62	53.1	16.1
35 × 35	.011	.279	.0176	.45	37.9	29.0
40 × 40	.010	.254	.0150	.38	36.0	27.6
50 × 50	.009	.229	.0110	.28	30.3	28.4
50 × 50	.008	.203	.0120	.31	36.0	22.1
60 × 60	.0075	.191	.0092	.23	30.5	23.7
60 × 60	.007	.178	.0097	.25	33.9	20.4
70 × 70	.0065	.165	.0078	.20	29.8	20.8
80 × 80	.0065	.165	.0060	.15	23.0	23.2
80 × 80	.0055	.140	.0070	.18	31.4	16.9
80 × 80	.0047	.119	.0078	.198	39	11.39
90 × 90	.005	.127	.0061	.16	30.1	15.8
100 × 100	.0045	.114	.0055	.14	30.3	14.2
100 × 100	.004	.102	.0060	.15	36.0	11.0
100 × 100	.0035	.089	.0065	.17	42.3	8.3

Mesh Count/ Inch	Wire Diameter				Type of Weave
	Warp wire dia.		Weft wire dia.
	inch	mm	inch	mm
12x64	0.023	0.58	0.0165	0.42	Plain
14x88	0.019	0.48	0.012	0.30	Plain
14x110	0.016	0.40	0.011	0.28	Plain
24x110	0.014	0.355	0.010	0.25	Plain

Application

-Boiler
-Furnace components
-Oven components.
-Petroleum Refining — catalytic recovery systems
-Thermal Processing
-Waste Treatment.
-Other high-temperature containers.

GET A QUOTE

Specification

Introduction

You May Also Like

Application

Product

Contact Us