Slip-resistant Dimpled Perf Metal Planks without Drainage Hole_METART BUILDING TECH CO., LTD

PRODUCTS

Perf Plank Safety Grating & Others / Anti-Slip Perf Metal Planks & Stair Treads

Architectural Decor Wire Mesh
Cabinet Door Mesh / Wall Cladding Mesh Lift Cabin Cladding Mesh / Elevator Mesh Decorative Wire Mesh Budget Architectural Wire Mesh Soft Architectural Mesh Framed Decor Woven Wire Screens Crimped Wire Mesh Stainless Steel Security Wire Mesh Stainless Steel Welded Wire Mesh Laminated Glass Infill Metal Fabric Architectural SS Wedge Wire Screen Custom Wire Mesh Fabrication
Industrial Wire Mesh & Filters
Stainless Steel Wire Mesh & SS Wire Cloth Brass-Copper-Bronze Mesh & Wire Cloth Special Alloy Wire Mesh & Wire Cloth Quarry Screen & Steel Wire Mesh & Gal Epoxy Powder Coated Steel Mesh for Filter Mosquito-Fly-Insect Screen Wire Mesh Bushfire Ember Wire Mesh & Perf Sheet Custom-Made Wire Mesh Cylinders & Filters
Perforated Metal & Expanded Metal
Standard Round Hole Perforated Sheets Square Hole Perforated Metal Decorative Perforated Sheet Decorative Laser Cut Screens Pic Perf Sheet-Picture Perforation Architectural Expanded Metal 1.8MM Perforated Aluminium Security Mesh 2.0MM Perforated Aluminium Security Mesh Heavy DVA Privacy AL Security Mesh Aluminium Light DVA Mesh Water Wall Mesh / Waterfall Mesh Precision Etching Micro Hole Perforated Plate
Architectural Cable Mesh Series
Woven Wire Drapery / Cable Rod Wire Mesh Stainless Steel Cable Netting
Architectural Metal Curtain Series
Metal Spiral Tension Mesh Metal Curtains / Metal Coil Drapery Metal Ring Mesh Curtain Anodized Aluminum Chain Curtain
Perf Plank Safety Grating & Others
Anti-Slip Perf Metal Planks & Stair Treads Steel & Stainless Steel Bar Grating

Slip-resistant Dimpled Perf Metal Planks without Drainage Hole

Specification

Material: Mild Steel, Galvanized Steel, Aluminum, Stainless Steel

Type: Perforated Anti-slip Mesh planks

Width: Custom-made.

Length: Within 10 inches,3048mm (up to 12 inches, 3658mm)

Height: 30-102mm and custom-made

Finish: Mill finish, Hot-dip galvanized, Electro-Galvanized, Powder Coated finish

GET A QUOTE

Introduction

This perforated dimpled metal grating is created to meet the needs of customers who don't wanna extra drainage holes on anti-skid plates or planks.

It is basically a modified version of 45°Perf-Oo safety grating. The hole diameter and centers can be customized based on customers' requirements.

We can also produce 60 degrees staggered hole patterns and other exotic designs.

Please refer to the following regular specification table.

Pattern	Hole Dia. mm	Pitch mm	Regular Height	Thickness Gauge Mild Steel/GA	Thickness Gauge Aluminum	Thickness Gauge Stainless Steel
45°Perf-1045	10	45	1.5" to 4" (38-102	#16,#14 1.5mm, 2mm	0.08", 0.1" 2mm,2.5mm	#17 (1.4mm)
45°Perf-2060	20	60	1.5" to 4" (38-102	#16,#14,#13 1.5mm, 2mm,2.3mm	0.08", 0.1",0.116 2mm,2.5mm,3mm	#17 (1.4mm)
45°Perf-2090	20	90	1.5" to 4" (38-102	#14,#13,#12 2mm, 2.3mm,2.7mm	0.08", 0.1",0.116 2mm,2.5mm,3mm	#17 or #14 1.4mm or 1.9mm
Note: Width: Custom-made Regular Lenth: Within 10' (3048mm), up to 12' (3658mm) Other pattern designs, hole diameter, and centers can be customized based on customers' requirements.

Drawing of anti-slip Perf planks pattern #45°Perf-1045.

Drawing of Perforated metal planks pattern #45°Perf-2060

Drawing of perforated steel safety grating and stair treads pattern #45°Perf-2090

You May Also Like

Application

GET A QUOTE

©COPYRIGHT METART BUILDING TEC CO., LTD | ALL RIGHTS RESERVED | PRIVACY POLICY