hello@metartmesh.com +86 158 0318 7372 / +61 435 598 786

METART-WW21-41019-Stainless Steel Metal Fabric

Specification

Material: Stainless Steel 304 / Stainless Steel 316

Type: Rigid Mesh

Opening Area: 28%

Weight: Approx 6.4kg/Square Meter

Finish: Mill Finish

Screen Width: Customized.

Screen Length: Customized.

GET A QUOTE

Introduction

This is the mill-finished version of this wire fabric pattern WW21-41019, which is just the original stainless steel finish, not polished, not brushed, not coated at all.

And this woven metal fabric pattern is quite similar to the pattern of WW19.  

According to its appearance, the only difference is the warp wires are replaced by small wire strips. The number 41019 represents the bigger strip diameter of 4x1mm and the smaller strip group pitch of 19mm.

Please feel free to contact us to get a customized finish such as antique brass finish, antique copper finish mesh or titanium plated mesh, etc.

Please refer to the following specifications.

Material

Stainless Steel 304 or 316, optional

Type

Rigid mesh

Bigger Wire Strip

4x1mm

Smaller Wire Strip

2.2x0.8mm

Bigger Strip Pitch

7mm

Smaller Strip Group Pitch

19mm

The total thickness of the fabric

2.1mm

Opening Area

28%

Block out

72%

Privacy Rate

72%

Weight

6.4kg/Square Meter

Finish

Stainless Steel Mill Finish

The way of cutting

Straight Cut

All optional ways of cut

Straight Cut Only

All optional Finish

Mill Finish ( Original stainless steel bright finish),
Antique Bronze plating, Antique Copper plating, Antique brass plate, vacuum titanium plated, Painted, PVDF Coated,

Customized specifications and Mini order accepted.

Note:

All the measurements including wire thickness, diameter, opening, and overall thickness are nominal numbers. The actual specification might have a tiny bit of tolerance according to fabrication

Application

GET A QUOTE

©COPYRIGHT METART BUILDING TEC CO., LTD  | ALL RIGHTS RESERVED | PRIVACY POLICY